Computers successfully tested with WiModem232

[utcv]

FWIW, these dip switch settings on the SSC:
Sw1 block
1 Off
2 Off
3 Off
4 on
5 on
6 on
7 on

Sw2 block
1 on
2 on
3 off
4 on
5 on
6 on
7 off

Did not work for me.

I did find another set that does:

Switch block #1
----------------
1-off \
2-on \_baud: 2400(over-ridden by Term program)
3-off /
4-on /
5-off \__Mode: SIC P8 EM
6-off /
7-off Protocol:Secondary clear to send (ganged with #7 on block 2)

Switch block #2
----------------
1-off Data format: 8 data/2 stop
2-off Delay after carriage return:32 ms
3-off \_Line width:80
4-on /
5-on Generate line feed: on
6-on Interrupts: on
7-on Protocol: Secondary clear to send (ganged with #7 on block 1)