Striketerm UP9600 freezes with WiModem
#7
As shown in the manual the correct syntax is:

URL[: PORT]

The port is optional.  If you don't include the port then the default output port will be used.  The default port is 1541.  Example uses:

ATDTCOMMODORESERVER.COM

This will connect to Commodore Server using port 1541.

ATDTGOOGLE.COM:80

This will connect to Google's server using port 80.  You can't do anything with it, it's just an example for connection.

Also keep in mind that you MUST be in ANSCII mode when dialing, and characters must be in upper case (as shown in the above examples) OR, if you are in CBM graphics mode you have to type the AT strings in all lower case.  There may be some cases where this doesn't always work, so it is recommended that always dial in ANSCII mode.
Reply


Messages In This Thread
RE: Striketerm UP9600 freezes with WiModem - by admin - 04-02-2018, 09:35 PM



Users browsing this thread: 1 Guest(s)