03-24-2017, 02:58 PM
(This post was last modified: 03-24-2017, 03:56 PM by Digital Man.)
Well, I've done a number of tests. When selecting UP9600 as the modem in StrikeTerm 2014 Final it always froze loading the driver. To make it work I had to start Striketerm without the WiModem plugged in. Select UP9600 and save the config. Then restart with the WiModem plugged in. I also set my protocol to Zmodem and the terminal to ANSI. Not sure if that makes a difference. But I could not change to UP9600 with WiModem plugged in.
Works now, and super fast file transfers with WiBridge.
Works now, and super fast file transfers with WiBridge.