Loader for the 38k Commodoreserver driver
#1
Hi All

I've  written a little loader for the 38k Commodoreserver driver.

It will load a 2400 baud driver (c64-up2400.ser) and set the neccesary settings on the Wimodem.
After this it will load the 38400 baud driver (v-1541.38k) , send the connection string (atdt commodoreserver.com:1541) to the Wimodem and then reset the C64.
At this point you can SYS 49152 and Load"$",2 as normal.


Download 

If you have any questions or problems, let me know in this thread.
The Workshop -  http://home.reidspace.com/ 

Reply
#2
Thanks for this! I am sure it will be very helpful!
Reply
#3
I have added WiReset to the downloads.

This will automatically reset the WiModem without having to power-cycle the machine after you use the v-1541.38k driver
The Workshop -  http://home.reidspace.com/ 

Reply
#4
(03-12-2017, 03:25 AM)Zeropage Wrote: I have added WiReset to the downloads.

This will automatically reset the WiModem without having to power-cycle the machine after you use the v-1541.38k driver

Thank for this.  I just received my WiModem and was trying to right a small basic program to accomplish all of these steps.  Sweet.
Reply




Users browsing this thread: 3 Guest(s)