02-20-2017, 10:22 AM
Oh sorry, missed that ati! command, sorry.
Just because nobody modified it yet to connect to DB9 and use Swiftlink doesnt automatically mean it is impossible ;-)
Ofcourse you have to add some Kind of Adapter that routes RXD,TXD,RI,RTS,CTS,DSR,DCD,DTR to the Swiftlik instead to C64Userport, which seems very doable as WiModem responds correctly and then we would have a 9600/19200 Wifi Swiftlink addon Modem which would help Sysops which are locked to Swiftlink Modem setup (just as me due Cbase not supporting UP9600) . Theese Signals should be available somewhere at the Circuit i guess.
All i would need is the schematics or the PCB. If you dont wanna share that as you might fear People cloning your Wimodem, just let me know and i`ll sort out that myself. Would take a little bit longer, but as i want the Wimodem to use for my BBS at 9600 i have to hack that myself.
Just because nobody modified it yet to connect to DB9 and use Swiftlink doesnt automatically mean it is impossible ;-)
Ofcourse you have to add some Kind of Adapter that routes RXD,TXD,RI,RTS,CTS,DSR,DCD,DTR to the Swiftlik instead to C64Userport, which seems very doable as WiModem responds correctly and then we would have a 9600/19200 Wifi Swiftlink addon Modem which would help Sysops which are locked to Swiftlink Modem setup (just as me due Cbase not supporting UP9600) . Theese Signals should be available somewhere at the Circuit i guess.
All i would need is the schematics or the PCB. If you dont wanna share that as you might fear People cloning your Wimodem, just let me know and i`ll sort out that myself. Would take a little bit longer, but as i want the Wimodem to use for my BBS at 9600 i have to hack that myself.