info to use wi modem

[admin]

Well, technically there is a bandwidth limitation. However, using the UP9600 hack with the baud rate turned up, it's theoretically possible to support up to 250Kbps. The cartridge port can access a UART/whatever hardware at full bus speed.

[scanword]

hi all in this moment i have downloaded ultimate version of contiky when i launch it she tell me :

1  rr net 
2  tfe 
3  eth64 

in this menu there is not a voice for wimodem o yes??

[Digital Man]

hi all in this moment i have downloaded ultimate version of contiky when i launch it she tell me :

1  rr net 
2  tfe 
3  eth64 

in this menu there is not a voice for wimodem o yes??

Contiki is for use only with Ethernet devices.  the WiModem emulates a modem only not Ethernet.   I believe Jim is looking into something like this however.

[scanword]

thanks

[admin]

Apparently, it should be possible to modify the Contiki code to support a direct web (telnet) connection. The only options in Contiki now are for various Ethernet hardware, which are poked at by Contiki.

[scanword]

Hello I still wanted to know the same problem is if I want to use IRC chat type there are no applications to connect the wimodem to an IRC ????

[admin]

Unless there is a C64 program that can do this via telnet, then there is no solution (other than to create such a program).

[scanword]

You have not setup your router!  You need to either use the WPS button on your router (and ATWPS), or set the router's name/password using the AT*SSID command.

Until you have done one of these two things, the router will not ever be found.

 ok now i see the router (i write at*ns1 , password and go on to the connection router) and the led is green with write ready  , now for connettion to commodore server i write ATDT COMMODORESERVER.COM:1541 and she write that is connected  but now  the cursor is freexed bloked and i dont write other command is normal???

and for use comet chat what do you do ??? now
please help me i have much program for cometchat but dont work  ok bye


hi i have a new problem with connection with my new modem  : i have chanced modem because broken but my ew moden have not wps  and i have do the manual set up ok : i have write at*n  and she write my cionnection line  and after i have write at*ns0, password of modem and return but nothing nothing connection .......there is an error in procedure or other in the last modem in this mode work ...please tell me ok bye  

[admin]

Once you have connected to Commodore Server you have to use it's commands. Like $ <RETURN> to see your current directory. You need to read the documentation for the Comet Chat, V-1541, etc.

[scanword]

Once you have connected to Commodore Server you have to use it's commands.  Like $ <RETURN> to see your current directory.  You need to read the documentation for the Comet Chat, V-1541, etc.

hi i have a new problem with connection with my new modem  : i have chanced modem because broken but my ew moden have not wps  and i have do the manual set up ok : i have write at*n  and she write my cionnection line  and after i have write at*ns0, password of modem and return but nothing nothing connection .......there is an error in procedure or other in the last modem in this mode work ...please tell me ok bye