If anyone else is having a problem with striketerm freezing when you try to change the modem to up9600, the solution is here :
http://www.lemon64.com/forum/viewtopic.p...34840d98ae
just remove the wimodem, set the modem in striketerm, save the config and plug the wimodem back in(obviously AFTER powering off the machine).
Works a charm.
EDIT: Spoke too soon, it all seems to work fine until you connect to a server. Then I get a message saying "Soft wdt RESET" with a stack dump after it.
I dumped the memory out to get the stacktrace :
CTX: CONT
SP: 3FFF2BA0 END: 3FFF2DE0 OFFSET: 01B0
>>>STACK>>>
3FFF2D50: 00000000 00000000 3FFF1BA0 402027EE
3FFF2D60: 3FFF2E30 3FFF1B54 3FFF1A7C 40203A68
3FFF2D70: 00000000 00000000 00000000 3FFF1DB8
3FFF2D80: 3FFF1BA0 3FFF1BC4 00000001 40203682
3FFF2D90: 3FFF1ADC 3FFF1AE7 3FFF1AA4
000DA0: 00000000 000000 0000000 0000001 3FFF1DB8 FFF2D 3FFF2DD
<<STACK<<
http://www.lemon64.com/forum/viewtopic.p...34840d98ae
just remove the wimodem, set the modem in striketerm, save the config and plug the wimodem back in(obviously AFTER powering off the machine).
Works a charm.
EDIT: Spoke too soon, it all seems to work fine until you connect to a server. Then I get a message saying "Soft wdt RESET" with a stack dump after it.
I dumped the memory out to get the stacktrace :
CTX: CONT
SP: 3FFF2BA0 END: 3FFF2DE0 OFFSET: 01B0
>>>STACK>>>
3FFF2D50: 00000000 00000000 3FFF1BA0 402027EE
3FFF2D60: 3FFF2E30 3FFF1B54 3FFF1A7C 40203A68
3FFF2D70: 00000000 00000000 00000000 3FFF1DB8
3FFF2D80: 3FFF1BA0 3FFF1BC4 00000001 40203682
3FFF2D90: 3FFF1ADC 3FFF1AE7 3FFF1AA4
000DA0: 00000000 000000 0000000 0000001 3FFF1DB8 FFF2D 3FFF2DD
<<STACK<<