01-05-2018, 01:10 PM
Firmware requests
|
01-05-2018, 01:31 PM
With the v2.00 and later firmware, some command syntax was changed. All WiModem specific commands now require a asterisks (*) between the AT and command. So, ATUPDATE is now AT*UPDATE.
05-04-2019, 10:15 AM
I didn’t see if anyone else already asked, but how about displaying settings on the oled, like baudrate, handshake and so on. Not using the WiModem regularly, it happens, that I forget which settings I had applied.
05-04-2019, 05:04 PM
Ok, noted! I have already added an online timer in some beta code. I can look at adding the baud rate and handshake. It's always 8N1, so that info isn't needed.
05-06-2019, 08:58 AM
(05-04-2019, 05:04 PM)admin Wrote: Ok, noted! I have already added an online timer in some beta code. I can look at adding the baud rate and handshake. It's always 8N1, so that info isn't needed. +1 for adding baud rate to the display - I use the WiModem232 and move it among a few machines and this would make it easier to know what my settings should be.
01-10-2021, 08:01 AM
I don't know how much of an undertaking this would be, however are you familiar with the IPP/CUPS network printer driver for GEOS? Bo Zimmerman developed the feature for the C64Net WiFi Modem. Unfortunately it is a custom firmware feature. Maybe it's too specific/unique of a request, but if it is possible to add that functionality it would be great!
01-10-2021, 03:04 PM
I have never heard of this before, and I have never really used GEOS before. But, I can look into it.
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)