My setup :)

[dfstudios]

Hi there,

Here is my SuperCard Pro setup which I am still in the processing of putting together:

   

My setup has the following features:

• 3 bay case with PSU
  
• SuperCard Pro (with 32GB MicroSD card fitted, just in case! )
  
• 64GB of storage via internally fitted USB drive (handy for storing SCP images )
  
• 5.25" floppy disk drive
  
• 3.5" floppy disk drive
  
• Memory card reader
  
• 5x front USB ports (for USB sticks, etc.)
  
• 2x rear USB ports (for connection to PC)
  
• Internal USB hub
  

It will also have an external switch mounted to the rear of the case that will allow me to be able to switch the SuperCard Pro into its programming mode for firmware updates, but unfortunately the supplier sent out the wrong switch type, so this will need to wait.

Kind regards,

Francis