03-30-2022, 09:54 AM
(This post was last modified: 03-30-2022, 10:00 AM by SunshineRag_CBM.)
Understood on the extra caps, really appreciate the time and effort to do all that you have done already. I actually had 2 other random suggestion that are just thoughts.
Milky/Fog Cap - Non clear translucent milky white works best to disperse LED, basically allows users to set the color with the LEDS without being blinded by a bright led under a clear cap. No idea if possible with ABS as as normally this is a different material like POM. Probably would be a great default if this is possible with your plastic choices and basically color then is up to the BlingBoard settings.
Also have you ever considered having these UV printed? The only tooling for this is a keycap jig to hold them steady, no pad setup or tooling required. I think this is more durable than pad printing and is super flexible once the print layout is configured.
Anyway great job, I fully understand the time and effort put in to get here.
Milky/Fog Cap - Non clear translucent milky white works best to disperse LED, basically allows users to set the color with the LEDS without being blinded by a bright led under a clear cap. No idea if possible with ABS as as normally this is a different material like POM. Probably would be a great default if this is possible with your plastic choices and basically color then is up to the BlingBoard settings.
Also have you ever considered having these UV printed? The only tooling for this is a keycap jig to hold them steady, no pad setup or tooling required. I think this is more durable than pad printing and is super flexible once the print layout is configured.
Anyway great job, I fully understand the time and effort put in to get here.