07-27-2020, 11:00 AM
Hi, I've attempted clean installs as administrator on three different PC's today, but constantly see the same issue - the PC does not recognize anything being plugged into the USB, and the SCP itself does not light the green LED next to the miniUSB - the red/green lights during booting seem okay.
Initially I see the ftd2xx.dll issue, but manage to resolve that by copying the file from USB to the SCP directory. (System32 / SysWOW64 do not seem to work).
Though it then runs, it complains that superdisk pro board not found...
I've read through the forums and tried the different recommendations - should I persevere with this as likely just the driver issue, or could the hardware be at fault?
Many thanks
Paul
Initially I see the ftd2xx.dll issue, but manage to resolve that by copying the file from USB to the SCP directory. (System32 / SysWOW64 do not seem to work).
Though it then runs, it complains that superdisk pro board not found...
I've read through the forums and tried the different recommendations - should I persevere with this as likely just the driver issue, or could the hardware be at fault?
Many thanks
Paul