04-30-2020, 11:44 PM
1) It is not possible to determine what is connected to a 34 pin interface. It could be a 3.5" drive, 5.25" drive, 8" drive, 3.0" drive, or even a MFM hard drive (which can be imaged with SuperCard Pro). Because there is no way to know what is connected, the disk type is used to determine the actual drive type required. The user has to tell the software what TPI their 5.25" drive is.
2) If you can find something that you can replicate I will certainly look at it. The only time the information should change is with a disk image is loaded, and that reflects the contents of the disk image. You can always send me a disk image that is doing this - maybe it's storing the disk type as C64?
3) OK!
2) If you can find something that you can replicate I will certainly look at it. The only time the information should change is with a disk image is loaded, and that reflects the contents of the disk image. You can always send me a disk image that is doing this - maybe it's storing the disk type as C64?
3) OK!