04-30-2020, 12:00 AM
1) There is no option to select a 3.5" disk drive because none is needed. The disk type automatically determines the drive that must be used (3.5" or 5.25"). You need to set the type of 5.25" disk drive you have (48TPI or 96TPI) when you are using a 5.25" disk drive. Otherwise, that is ignored because it doesn't match the disk type when a 3.5" disk drive is used.
2) The disk type is what will auto-change the settings. An image file contains the disk type information in it. So, if you were loading a C64 disk image when you were last doing something with a 720K disk type, it should change to C64.
3) This is because you are not running the SCP program in Administrator mode. This is not optional.
2) The disk type is what will auto-change the settings. An image file contains the disk type information in it. So, if you were loading a C64 disk image when you were last doing something with a 720K disk type, it should change to C64.
3) This is because you are not running the SCP program in Administrator mode. This is not optional.