09-26-2018, 06:30 PM
Are you plugging the WiModem232 directly into the SCC or are you using a cable connected between them?
ADT should not work at all with the dip switch settings shown in the picture. ADT also requires a NULL modem cable, which will not work with the WiModem232. Just like a real modem you must use a modem cable, which is not the same as a NULL modem cable.
Are you selecting a 300 baud modem driver?
ADT should not work at all with the dip switch settings shown in the picture. ADT also requires a NULL modem cable, which will not work with the WiModem232. Just like a real modem you must use a modem cable, which is not the same as a NULL modem cable.
Are you selecting a 300 baud modem driver?