Show your installation!
#4
That information you made in bold text pertains to JiffyDOS on the computer side, not the disk drive side.  You still need JiffyDOS on the disk drive side in order to have fast transfers.  If you have only the computer side you won't have fast transfers, just the DOS shortcuts.

The only way to have a switchable JiffyDOS is by having the version that comes with a drive select switch.  If you don't, then you can't switch it with the SuperTracker II.  If you have the switchable version, then you can just attach the wire to the chip select line of the ROM.  That select line can be different pins on the ROM, depending on the size of the ROM.  You apparently do not have a switchable version so you can't use the switching feature.

The micro push button is designed to be "screwed" into the plastic face plate on the 1571.  The plastic used on the 1571 is much thicker than the 1541's plastic, where you can use the nut.
Reply


Messages In This Thread
Show your installation! - by admin - 05-27-2018, 11:00 PM
RE: Show your installation! - by Raymond Day - 11-27-2018, 10:29 AM
RE: Show your installation! - by Raymond Day - 11-27-2018, 10:51 AM
RE: Show your installation! - by admin - 11-27-2018, 11:20 AM
RE: Show your installation! - by Raymond Day - 11-28-2018, 07:40 AM
RE: Show your installation! - by admin - 11-28-2018, 05:18 PM
RE: Show your installation! - by Raymond Day - 11-29-2018, 03:34 AM
RE: Show your installation! - by admin - 11-29-2018, 10:04 AM
RE: Show your installation! - by sebos - 12-05-2020, 06:33 AM
RE: Show your installation! - by admin - 12-05-2020, 12:22 PM



Users browsing this thread: 1 Guest(s)