Magic jumper setting
If you have a Panasonic 5.25" disk drive (-3, -4, -5) move the "BX" or "DX" jumper to the "EX" position. This lets you write to the backside of a disk, ignoring the fact that there is no index pulse. You will need to set the INDEX SENSOR/WRITE to IGNORE for the SuperCard Pro to write to the backside of disks. This lets you put two disk programs on a single disk.

Messages In This Thread
Magic jumper setting - by admin - 12-19-2013, 02:44 PM

Users browsing this thread: 1 Guest(s)