03-25-2018, 01:34 PM
(03-25-2018, 10:09 AM)admin Wrote: Several parts of the code are in assembly. The boot loader baud is 76800, that is what I have been using during development.
What "bug" are you referring to? I have tested up to 230400 baud using a PCI-e serial card. I run my Amiga every day at 115200 baud.
You set the serial speed at 115200 baud with at*b115200 and save with at&w. Working until you do a reset with a power cycle. And now the wimodem don't communicate at all. It set a unknown serial speed that isn't a standard rs232 speed (or bad data format). I got garbage characters on screen at all possible speeds. I use the internal COM of motherboard. Tomorrow i test with a usb to serial converter. At 19200 i don't have this issue.