02-01-2018, 05:16 AM
Sorry, it is not woking how you describe.
In fact, thinking that you may have made a firmware update I update it today, but the latest AT*UPDATE downgraded the firmware on my WiModem232 from 2.40 01/28/18 to v2.31 01/16/18
See my actual resultant WiModem232 behaviour here:
http://home.ca.inter.net/~henryp/IMG_2952.JPG
http://home.ca.inter.net/~henryp/IMG_2953.JPG
Baud rate is 9600 as can be seen from the status bar.
You'll see the ATV0X1 command followed by a remote connection: 1(ring) 1(ring) 2(connect)
Yesterday with the 2.4 I was getting verbose CONNECT 9600 messages but today I'm not, nor am I getting a code 12 for CONNECT 9600 with the ATV0X1 command.
In fact, thinking that you may have made a firmware update I update it today, but the latest AT*UPDATE downgraded the firmware on my WiModem232 from 2.40 01/28/18 to v2.31 01/16/18
See my actual resultant WiModem232 behaviour here:
http://home.ca.inter.net/~henryp/IMG_2952.JPG
http://home.ca.inter.net/~henryp/IMG_2953.JPG
Baud rate is 9600 as can be seen from the status bar.
You'll see the ATV0X1 command followed by a remote connection: 1(ring) 1(ring) 2(connect)
Yesterday with the 2.4 I was getting verbose CONNECT 9600 messages but today I'm not, nor am I getting a code 12 for CONNECT 9600 with the ATV0X1 command.