DSR / DTR and solder pads
#5
(01-24-2018, 02:15 PM)admin Wrote: Having DTR tied to DSR is normal.  The computer brings DTR high and expects DSR to go high when the modem is ready.  What problem are you having with higher baud rates?  If the cable works at 2400 baud, then it works at all baud rates.

Any reason you are using ProTerm 1.9 instead of the latest v3.1?

Tried it with ProTerm 3.1.  I can now achieve 9600 baud.  Must be something weird about ProTerm 1.9.
Thanks.
Reply


Messages In This Thread
DSR / DTR and solder pads - by Baldrick - 01-24-2018, 08:57 AM
RE: DSR / DTR and solder pads - by admin - 01-24-2018, 11:19 AM
RE: DSR / DTR and solder pads - by Baldrick - 01-24-2018, 11:32 AM
RE: DSR / DTR and solder pads - by admin - 01-24-2018, 02:15 PM
RE: DSR / DTR and solder pads - by Baldrick - 01-24-2018, 08:03 PM
RE: DSR / DTR and solder pads - by admin - 01-24-2018, 11:19 PM



Users browsing this thread: 2 Guest(s)