03-28-2014, 05:20 PM
Release v1.07
- Fixed problem in analyzer with SYNC values larger than 1 word in length.
- Fixed display in analyzer when SYNC value is never found.
- Added No-Flip (Flippy modded) drive support to the analyzer. You can use either the Panasonic or Teac drives. Panasonic drives use the -4 track setting and Teac drives use the +4 setting. Once Flip-It mod is selected, the head can be selected in the Media Controls (along with the track). Please note that the flux data is shown in the reverse order because the disk is spinning backwards for the opposite side.
- Fixed drive to drive copies in splice mode to use no more than 2 revs.
- Changed minimum firmware requirement to v0.9.
- Fixed full weakbit tracks generating error with C64 disks in analyzer.
- Fixed huge bugs in the Splice (old non-blind) copy mode. The drive to drive was completely broken, and the image to drive had numerous little issues.
- Fixed minimum and maximum bitcell times shown on the flux display. The drive speed was not factored in previously.
- Changed draw mode for lines used in the flux display so that flux data OR's with the line instead of XOR'ing it.
- Added code to the Find Invalid button in the analyzer for FM and MFM formats - previously only C64 disks were supported.
- Fixed a problem when jumping between Flux/FM/MFM/GCR modes in the analyzer.