11-28-2013, 11:42 AM
Beta .52 moves some buffers around and reduces memory consumption (not that it matters with the size of these image files being <10MB).
Changed the sync detection in Commodore GCR mode to be 10 or more consecutive 1 bits, highlighting all bytes that make up the series of bits (suggestion made by LordCrass long ago).
Corrected problem reported with dual drive copies (requires new v0.3 firmware). New firmware version can be download here.
Changed GET/SET_PARAMS to be 4 words of data for the delays: select, step, motor on, and seek 0. This lets us get/set the delays remotely in case they need to be changed for drive compatibility.
NOTE to beta testers... as you have discovered, the v.2->v.3 firmware updater always shows the firmware version as being v.2 when running the flasher. Please ignore that! When the SCP program runs, just make sure that it shows v.3 as the firmware version in the title bar. I will fix that issue at some point. Production boards don't have this issue.
Changed the sync detection in Commodore GCR mode to be 10 or more consecutive 1 bits, highlighting all bytes that make up the series of bits (suggestion made by LordCrass long ago).
Corrected problem reported with dual drive copies (requires new v0.3 firmware). New firmware version can be download here.
Changed GET/SET_PARAMS to be 4 words of data for the delays: select, step, motor on, and seek 0. This lets us get/set the delays remotely in case they need to be changed for drive compatibility.
NOTE to beta testers... as you have discovered, the v.2->v.3 firmware updater always shows the firmware version as being v.2 when running the flasher. Please ignore that! When the SCP program runs, just make sure that it shows v.3 as the firmware version in the title bar. I will fix that issue at some point. Production boards don't have this issue.