01-30-2016, 02:38 PM
I have a couple of variations of the Teac FD-55GFR drive. One worked with SuperCard Pro no problem, but the other was not detected by the software.
It turned out that the drive that didn't work had one of the jumper settings on the bottom of the drive set to D0. Moving the jumper from D0 to D1 allowed it to work okay with SuperCard Pro.
Kind regards,
Francis
It turned out that the drive that didn't work had one of the jumper settings on the bottom of the drive set to D0. Moving the jumper from D0 to D1 allowed it to work okay with SuperCard Pro.
Kind regards,
Francis
Dreamland Fantasy Studios
http://www.dfstudios.co.uk
http://www.dfstudios.co.uk