Flashing new firmware
#1
The ICS64S uses a standard SERIAL connection (Rx/Tx/VCC/GND), making it compatible with CP2102 and FTDI USB to serial interfaces.

The flashing software will use a COM port.
Reply
#2
A couple questions:
1. Where is the most current firmware available from?
2. Is it open source?
3. What firmware flash utility should be used?

Thanks!
Reply
#3
There is no firmware currently available as it has not changed at this point.

No, it is not open source.

I have a flash and settings changer program for the PC. I will put together an archive shortly.
Reply




Users browsing this thread: 1 Guest(s)