cp/m bootable disk - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: SuperCard Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=3) +---- Forum: Other disks (https://www.cbmstuff.com/forum/forumdisplay.php?fid=14) +---- Thread: cp/m bootable disk (/showthread.php?tid=762) |
cp/m bootable disk - Mihail - 09-30-2020 Hello everybody. I have a problem to copy bootable disk. I have Mitsubishi EDM machine. There are six disks. Four of them must be bootable. I can copy every disk and machine read the information there, but I can boot machine from disks. I copy cp/m disk with 360k density 40 tracks head 1 index than load info to a new disk. I know that there is a little difference in first track for bootable disks, but I don't know what exactly it means. I attached scp file. Can somebody help me? https://drive.google.com/file/d/1Ko-0zNyVYkHWKo6tRJCO4_Gj6rO6cTLO/view?usp=sharing RE: cp/m bootable disk - admin - 09-30-2020 I am not sure what problem you are having. Can you not copy the disks? Your image shows the drive speed has a severe problem (see below). The disk decodes correctly though using HxC. Maybe the problem is writing the disk on this drive? Make an image of the copy you made and post that. RE: cp/m bootable disk - Mihail - 10-01-2020 Image ->copy disk Copy disk -> image2 https://drive.google.com/file/d/1WmJx9NMLfUU78Sb7cLw3om0UaFbJmOKX/view?usp=sharing I use powerfor floppy drive from doc station USB. May be that is a problem with speed. I can copy disks, can read names on the file on my machine, but these copied disks are not bootable. |