WiModem232 and Apple IIgs - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: WiModem232 / WiModem232 Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=79) +--- Thread: WiModem232 and Apple IIgs (/showthread.php?tid=706) |
WiModem232 and Apple IIgs - bikeguychicago - 04-23-2020 I just purchased the WiModem232 and I'm trying to use it with the modem port built into the machine. I have the WiModem232 connected to a DIN-8 -> 25PIN serial cable on the modem port. When trying to connect to the modem using ProTerm, the modem is not recognized. I fiddled around with the control panel settings and the modem settings in the terminal app and I still can't get it to be recognized. If anyone has some suggestions as to what I should check and/or try, please let me know. Thank you! Keith Sheehan RE: WiModem232 and Apple IIgs - admin - 04-24-2020 Did you look at this thread? https://www.cbmstuff.com/forum/showthread.php?tid=477 RE: WiModem232 and Apple IIgs - bikeguychicago - 04-25-2020 (04-24-2020, 12:10 AM)admin Wrote: Did you look at this thread? https://www.cbmstuff.com/forum/showthread.php?tid=477That did it! Thanks! One other question, how does one get color ANSI graphics when connecting to a board from ProTerm? RE: WiModem232 and Apple IIgs - admin - 04-25-2020 Glad that worked! Sorry, I don't know about your ANSI question. I have only seen B&W out of ProTerm. |