Project status... - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: Products coming in 2024 (https://www.cbmstuff.com/forum/forumdisplay.php?fid=129) +---- Forum: µDrive (micro-Drive) (https://www.cbmstuff.com/forum/forumdisplay.php?fid=95) +---- Thread: Project status... (/showthread.php?tid=534) |
Project status... - admin - 06-08-2018 I am still in the process of getting quotes and making changes to help reduce the production. I expect to choose a manufacturer shortly and do a small (250 piece) production run to make sure there are no design or production issues before doing a full scale production run. RE: Project status... - Raymond Day - 11-15-2018 (06-08-2018, 10:59 AM)admin Wrote: I am still in the process of getting quotes and making changes to help reduce the production. I expect to choose a manufacturer shortly and do a small (250 piece) production run to make sure there are no design or production issues before doing a full scale production run. I am really looking foreword to this. Sounds so super good. I have a CMD HD too and even a FD4000 so it will be good to have them on a SD card and work right from there and sounds like you can use super card to back up store bought 1541 disk and then will work on this uDrive. Thank you. -Raymond Day RE: Project status... - admin - 11-16-2018 Yes, I used SuperCard Pro to create all of my .g64 test images. |