Magic jumper setting - Printable Version

+- CBMSTUFF FORUM (https://www.cbmstuff.com/forum)
+-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1)
+--- Forum: SuperCard Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=3)
+---- Forum: Hardware (https://www.cbmstuff.com/forum/forumdisplay.php?fid=42)
+----- Forum: Compatible Drives (https://www.cbmstuff.com/forum/forumdisplay.php?fid=43)
+----- Thread: Magic jumper setting (/showthread.php?tid=51)

Magic jumper setting - admin - 12-19-2013

If you have a Panasonic 5.25" disk drive (-3, -4, -5) move the "BX" or "DX" jumper to the "EX" position. This lets you write to the backside of a disk, ignoring the fact that there is no index pulse. You will need to set the INDEX SENSOR/WRITE to IGNORE for the SuperCard Pro to write to the backside of disks. This lets you put two disk programs on a single disk.