Unable to enter AT commands in CCGMS - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: WiModem (https://www.cbmstuff.com/forum/forumdisplay.php?fid=75) +---- Forum: Usage (https://www.cbmstuff.com/forum/forumdisplay.php?fid=77) +---- Thread: Unable to enter AT commands in CCGMS (/showthread.php?tid=496) |
Unable to enter AT commands in CCGMS - chimera123 - 03-18-2018 Hello, I was able to successfully connect my Wimodem to my wifi (Status: Ready). Afterwards I wanted to test the modem with CCGMS V6 incl. ZTERM but the problem is after starting the SW I am not able to enter any AT Commands --> Cursor is fixed, doesn´t move. I tried to change from Graphics mode to ASCII no change - Also when I try to call a BBS with the F-Keys, nothing happens. Somehow it looks to me that CCGMS/ZTERM does not recognize my modem. Then I checked with Novaterm - with this SW I was able to send AT-Command - but I would really like to use CCGMS Has anybody an idea what is wrong or what needs to be changed in CCGMS to make it work with Wimodem? Thanks Chimera RE: Unable to enter AT commands in CCGMS - admin - 03-18-2018 Set your baud rate to whatever you are using in Novaterm. RE: Unable to enter AT commands in CCGMS - chimera123 - 03-19-2018 Hello, Unbelievable....that fixed it Thank you so much for this suggestion Chimera |