The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



CBMSTUFF FORUM
The drive LED doesn't go off - Printable Version

+- CBMSTUFF FORUM (https://www.cbmstuff.com/forum)
+-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1)
+--- Forum: SuperCard Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=3)
+---- Forum: Installation and setup (https://www.cbmstuff.com/forum/forumdisplay.php?fid=5)
+---- Thread: The drive LED doesn't go off (/showthread.php?tid=409)

Pages: 1 2

RE: The drive LED doesn't go off - admin - 12-19-2017

I got your SuperCard Pro board back and it works perfectly!

I am guessing that your cable, drive, or power supply has to be an issue.  What jumpers do you have on the floppy drive?

RE: The drive LED doesn't go off - jhons7 - 12-19-2017

Why!? I don't know why It's didn't work on my FDD.
Here is jumper settings for MPF920-5 and MPF420-4.

I'm also using MPF920-5 for KryoFlux. It works perfectly.

       

RE: The drive LED doesn't go off - admin - 12-19-2017

I am not sure how those jumpers are set (can't tell from the picture). You will want to look at DS0, DS1, and DS2 jumper positions. I just plugged your SuperCard Pro board into my NEC drive and it worked. I will have to find one of my MPF920 drive and try it, but I expect it to work just fine. Your boards passes all of the diagnostics and made a few copies that worked fine.