The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
|
[SOLVED] Can't Connect to tty.sdf.org - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: WiModem (https://www.cbmstuff.com/forum/forumdisplay.php?fid=75) +---- Forum: Firmware (https://www.cbmstuff.com/forum/forumdisplay.php?fid=78) +---- Thread: [SOLVED] Can't Connect to tty.sdf.org (/showthread.php?tid=402) |
RE: Can't Connect to tty.sdf.org - kd4cbm - 10-12-2017 (10-12-2017, 04:54 PM)admin Wrote: I just tried it at 9600 baud with CCGMS and it works fine. I am able to log in and go to BOOP room and such. I still haven't had any luck, but I did want to check if a factory reset should clear the last connected WAP. If it is supposed to, mine isn't. That may be normal behavior though. RE: Can't Connect to tty.sdf.org - admin - 10-12-2017 Did you remember to enable the TELNET translation mode with the new AT command? AT*T1 turns on TELNET parsing. The factory reset does NOT clear the SSID/Password entries. RE: Can't Connect to tty.sdf.org - kd4cbm - 10-12-2017 (10-12-2017, 07:55 PM)admin Wrote: Did you remember to enable the TELNET translation mode with the new AT command? AT*T1 turns on TELNET parsing. Enabling telnet parsing took care of it. Thanks for the time and work in resolving this! I'm sure this will be useful for a lot of people moving forward. RE: Can't Connect to tty.sdf.org - admin - 10-12-2017 Great to hear! I updated the manual with the new feature. I have never seen the telnet access before. I chatted with a bunch of people through the portal. I am going to look into this some more with the new WiModem232, where I have a 80 column display on the Amiga. It's looks all wonky on a C64. RE: Can't Connect to tty.sdf.org - kd4cbm - 10-13-2017 (10-12-2017, 08:39 PM)admin Wrote: Great to hear! I updated the manual with the new feature. Yeah, it does better with a Novaterm variant in VT102 mode with a proper termcap on the server side than in 40 C mode. Not perfect by any means, but very usable though. Even better still on a 1082 in monochrome mode... You sir have made the upcoming weekend a little brighter in terms of playing with C= toys. Thanks again Jim! RE: Can't Connect to tty.sdf.org - admin - 10-13-2017 No problem! Let me know if you run into any issues, or if any other parsing commands need to be supported. RE: Can't Connect to tty.sdf.org - Zeropage - 10-14-2017 I was playing with this this evening, its very cool. Going to play with it some more. Something interesting I found though. I was getting a lot of dropped chars and garbled text with StrikeTerm final in 80 col mode. So out of curiosity, I switched on turbo mode in my Turbo Chameleon and tried it again. It works flawlessly and is a silky smooth experience at 9600 baud. RE: Can't Connect to tty.sdf.org - admin - 10-14-2017 Make sure that you use AT&K1 to enable the hardware flow control in 9600 baud mode! This could be your problem. RE: Can't Connect to tty.sdf.org - kd4cbm - 10-16-2017 (10-14-2017, 12:09 PM)Zeropage Wrote: I was playing with this this evening, its very cool. Going to play with it some more. Were you able to get this sorted out without turbo mode? I've been running @ 4800 fine, but 9600 gives me the same thing you are experiencing even with handshaking enabled. RE: Can't Connect to tty.sdf.org - kd4cbm - 10-16-2017 I'm wondering if terminal-speed might be useful to implement. Should help with the fact we are working with bare minimal buffers at least. RFC1079 should be helpful... https://www.ietf.org/rfc/rfc1079.txt - to save you a google query. |