Telnet to sdf.org - anyone have success? - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: WiModem (https://www.cbmstuff.com/forum/forumdisplay.php?fid=75) +---- Forum: Usage (https://www.cbmstuff.com/forum/forumdisplay.php?fid=77) +---- Thread: Telnet to sdf.org - anyone have success? (/showthread.php?tid=360) |
Telnet to sdf.org - anyone have success? - fuzzybad - 02-09-2017 Hi all, Has anyone had success connecting to sdf.org shell account? So far I've been able to connect my WiModem to BBS's, commoreserver.com, and Q-Link Reloaded. Is it possible to connect to a shell account via telnet, for example using sdf.org? Here's what I'm trying: ATDT SDF.ORG:22 Response: CONNECT [connection freezes] and ATDT SDF.ORG:23 Response: [some SSH information, then connection freezes] Any tips? Perhaps I need to specify a different port number? RE: Telnet to sdf.org - anyone have success? - Zeropage - 02-09-2017 I've managed to telnet to a server on my own network using Kpym http://www.kpym.com/2/kpym/faq.htm It was fairly painless if I remember correctly. You may have to play with uppercase/lowercase for the address. RE: Telnet to sdf.org - anyone have success? - jupp - 02-09-2017 i somehow doubt that shell providers still offer actual telnet - its probably SSH most of the time, and that certainly will not work RE: Telnet to sdf.org - anyone have success? - fuzzybad - 02-09-2017 (02-09-2017, 02:29 PM)jupp Wrote: i somehow doubt that shell providers still offer actual telnet - its probably SSH most of the time, and that certainly will not work Ok, thanks for the feedback. I know SSH isn't possible on a 64. RE: Telnet to sdf.org - anyone have success? - jsori1 - 02-09-2017 Hi, I am a lifetime member of sdf.org and have had several shell accounts with sdf.org using my C-64. I have tried to connect directly to sdf.org using the WiModem with no success. But here is what I have done to get connected to sdf.org I have found several BBS's on the net that have telnet outbound. I telnet to the BBS with my C-64, log in on that BBS and become a member of that BBS. Then go to their main menu looking for internet services and telnet outbound. Once in the telnet outbound menu, I type in sdf.org and am telnetted again to sdf.org. I then, log into sdf.org I hope that this can help you. RE: Telnet to sdf.org - anyone have success? - admin - 02-10-2017 A connection is a connection, so if sdf.org does not respond with data, then you probably have the wrong port number or it's being refused for whatever reason. |