The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.27 (Linux)
|
info to use wi modem - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: WiModem (https://www.cbmstuff.com/forum/forumdisplay.php?fid=75) +---- Forum: Usage (https://www.cbmstuff.com/forum/forumdisplay.php?fid=77) +---- Thread: info to use wi modem (/showthread.php?tid=339) |
info to use wi modem - scanword - 10-09-2016 hi it is possible send or receive e mail with Google or libero??? RE: info to use wi modem - admin - 10-09-2016 The WiModem uses TCP packets. I suppose it would be possible if something used a telnet port to handle email. RE: info to use wi modem - scanword - 10-09-2016 (10-09-2016, 11:08 AM)admin Wrote: The WiModem uses TCP packets. I suppose it would be possible if something used a telnet port to handle email. ok for me is only curiosity but if she can it is the best , it will be a gratification for me send a mail with c 64 but i dont know to make it ...understand if you have notice about this tell me please ok bye thanks RE: info to use wi modem - Flack - 10-09-2016 Good news, it's fairly simply to send and receive email using telnet: https://mediatemple.net/community/products/dv/204404584/sending-or-viewing-emails-using-telnet Bad news, it's fairly tough to do that with Google/Gmail. I think Gmail requires SSL now, and a lot more handshakes and processes than a simple SMTP/POP connection. RE: info to use wi modem - scanword - 10-13-2016 (10-09-2016, 04:58 PM)Flack Wrote: Good news, it's fairly simply to send and receive email using telnet: thi , thanks for reponse ,when i receive wimodem if i have problem or i dont do the connection with telnet i ask you for help ok bye thanks RE: info to use wi modem - scanword - 10-31-2016 (10-13-2016, 11:10 AM)scanword Wrote:(10-09-2016, 04:58 PM)Flack Wrote: Good news, it's fairly simply to send and receive email using telnet: hi today i receive the wimodem and now i have mooore problem when i start the c 64 the wimodem serach router but dont find ....i must configure the ruoter now ??? RE: info to use wi modem - admin - 10-31-2016 You need to either use the WPS button and ATWPS, or manually setup the connection as discussed in the manual. Once you have setup the router connection you don't have to do it again.. it will automatically find the router when you power up the C64. RE: info to use wi modem - scanword - 11-01-2016 ok now in this moment i have downaloded 3 program for my c 64 : novaterm , z term and cggms ....but only that work is z term , and i use it : the situation is not changed because my router see a wimodem because when i start the wi modem on c 64 on my router see new wi fi connection ..... of my router wifi connection i think that the connection of wi modem is this : esp_092f3f 62:01:94:09:2f:3f canale 1 not blocked but wi modem write no router located when i use zterm and when i write ati (return_) she write this : wimodem - ©2016 by jim Drew firmware : v.1.3 - 09/06/16 baud: 2400 port : 1541 ssid : mac:60:1:94:9:2f:3f ip: 0.0.0.0 fcc id : 2aduiesp-12 but i dont know what to do please help me RE: info to use wi modem - scanword - 11-01-2016 if you want my mail is organza2000@libero.it for help me bye thanks RE: info to use wi modem - admin - 11-01-2016 You have not setup your router! You need to either use the WPS button on your router (and ATWPS), or set the router's name/password using the AT*SSID command. Until you have done one of these two things, the router will not ever be found. |