The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.27 (Linux)
|
CommdoreServer V-1541 instructions - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: WiModem (https://www.cbmstuff.com/forum/forumdisplay.php?fid=75) +---- Forum: Usage (https://www.cbmstuff.com/forum/forumdisplay.php?fid=77) +---- Thread: CommdoreServer V-1541 instructions (/showthread.php?tid=321) |
RE: CommdoreServer V-1541 instructions - scanword - 11-06-2016 (11-05-2016, 05:46 PM)admin Wrote: You need to learn and understand how ASCII and CBM graphics modes work. This is same with all devices - real modems, fake modems, etc. It's a CBM program thing and has nothing to do with the WiModem. ok now i have connected my c 64 with other bbs page (mad world , avalonisle ,border line , scorp portal wrong number ) and i subscribe it ...now i whant know if there are the bbs page where there are person to chat or there are a chat to use for speack with other person ok thanks bye ( in the previoun time i connect with a person in china but have no timre to speack .....but no orther connection tio chat ) it is possible have other ??? RE: CommdoreServer V-1541 instructions - admin - 11-06-2016 You can use Q-Link, Comet Chat, and a few others. RE: CommdoreServer V-1541 instructions - scanword - 11-07-2016 (11-06-2016, 05:33 PM)admin Wrote: You can use Q-Link, Comet Chat, and a few others. ok thanks buyt a curiosity if i change my baud to 38400 or other 9600 etc .... when i turn off my c 64 a nd the wi modem the baud return to 2400 ??? RE: CommdoreServer V-1541 instructions - admin - 11-07-2016 Only if you deliberately store the settings (AT&W). RE: CommdoreServer V-1541 instructions - scanword - 11-10-2016 (11-05-2016, 05:46 PM)admin Wrote: You need to learn and understand how ASCII and CBM graphics modes work. This is same with all devices - real modems, fake modems, etc. It's a CBM program thing and has nothing to do with the WiModem. hi today i want change baud but do not work : i connect to 2400 when i use terminal to change to 38400 but i dont know how change the polarities of handscaking because i have two voice : cts and dcd ...but i must change all two ?? and after when i passed to 0 in all two voice i passed in to 38400 baud ...but after i do not is possible write correct caracter .......i dont know how do now . Please tell me the correct procedure because i think that i do an erroro of procedure ok bye RE: CommdoreServer V-1541 instructions - admin - 11-11-2016 The DCD polarity can be left alone. You need to invert the CTS polarity, and then handshake polarity. You MUST be using the V1541-38400 driver. No other driver will work. RE: CommdoreServer V-1541 instructions - scanword - 11-11-2016 (11-11-2016, 11:39 AM)admin Wrote: The DCD polarity can be left alone. You need to invert the CTS polarity, and then handshake polarity. You MUST be using the V1541-38400 driver. No other driver will work. ok i can not use this procedure ....because i write this : at*b1200 or 2400 or 4800 or 38400 ....and after return and write ok but after i cannot write ....no caracter no possibiliti to write then .......... and now?? RE: CommdoreServer V-1541 instructions - admin - 11-11-2016 You have to load and activate V1541-38400 driver after setting the baud rate and polarities for the 38400 baud driver, using the normal V1541 driver. RE: CommdoreServer V-1541 instructions - scanword - 11-12-2016 (11-11-2016, 11:39 AM)admin Wrote: The DCD polarity can be left alone. You need to invert the CTS polarity, and then handshake polarity. You MUST be using the V1541-38400 driver. No other driver will work. HELLO THEN I HAVE LOADED BEFORE V-1541 38 K THEN I HAVE LOADED THE TERMINAL AND HAVE MOVED POLARITIES DCD EL OTHER HANDSCHIP BUT JUST CHANGED IN 38400 PORTEVO NOT WRITE MORE CHARACTERS ON THE TERMINAL PROGRAM THEN I reloaded FILE V 1541 38 K BUT DOES NOT HAVE wRONG THE PROCEDURE WHAT HAPPENS C 'is SOMETHING wRONG? RE: CommdoreServer V-1541 instructions - admin - 11-12-2016 I think you are confused about what V1541 is! You can't use a terminal program with V1541! The V1541-38400 program is only for using the various Commodore Server programs (like Comet Chat). For terminal programs, you would have to use 300-9600 baud, with the appropriate terminal driver. |