+- CBMSTUFF FORUM (https://www.cbmstuff.com/forum)
+-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1)
+--- Forum: WiModem (https://www.cbmstuff.com/forum/forumdisplay.php?fid=75)
+---- Forum: Firmware (https://www.cbmstuff.com/forum/forumdisplay.php?fid=78)
+---- Thread: Firmware requests (/showthread.php?tid=311)
Pages:
1
2
RE: Firmware requests - Zeropage - 01-05-2018
(01-05-2018, 08:04 AM)pawprintlogic1 Wrote: I see an update is available but when I type ATUPDATE or atupdate all I get is "error".. do I need to reset the modem??
Thanks!!
hiya
its at*update
RE: Firmware requests - admin - 01-05-2018
With the v2.00 and later firmware, some command syntax was changed. All WiModem specific commands now require a asterisks (*) between the AT and command. So, ATUPDATE is now AT*UPDATE.
RE: Firmware requests - captain_zzap - 05-04-2019
I didn’t see if anyone else already asked, but how about displaying settings on the oled, like baudrate, handshake and so on. Not using the WiModem regularly, it happens, that I forget which settings I had applied.
RE: Firmware requests - admin - 05-04-2019
Ok, noted! I have already added an online timer in some beta code. I can look at adding the baud rate and handshake. It's always 8N1, so that info isn't needed.
RE: Firmware requests - willwinter - 05-06-2019
(05-04-2019, 05:04 PM)admin Wrote: Ok, noted! I have already added an online timer in some beta code. I can look at adding the baud rate and handshake. It's always 8N1, so that info isn't needed.
+1 for adding baud rate to the display - I use the WiModem232 and move it among a few machines and this would make it easier to know what my settings should be.
RE: Firmware requests - Digital Man - 01-10-2021
I don't know how much of an undertaking this would be, however are you familiar with the IPP/CUPS network printer driver for GEOS? Bo Zimmerman developed the feature for the C64Net WiFi Modem. Unfortunately it is a custom firmware feature. Maybe it's too specific/unique of a request, but if it is possible to add that functionality it would be great!
RE: Firmware requests - admin - 01-10-2021
I have never heard of this before, and I have never really used GEOS before. But, I can look into it.