The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
|
Writes not working - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: SuperCard Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=3) +---- Forum: Hardware (https://www.cbmstuff.com/forum/forumdisplay.php?fid=42) +---- Thread: Writes not working (/showthread.php?tid=308) |
RE: Writes not working - admin - 05-25-2016 Can you run the media integrity test on the 3.5" drive setup, and then dump that disk and send it to me? Did you try changing the density with the pull-down menu option? RE: Writes not working - bani - 05-25-2016 is it normal for huey to run at 80C? I brushed it with my finger when plugging in the cable and nearly got burned. direct contact thermistor says huey is running near published thermal limits for the part. I tried both low and high density. media integrity errors out on the first track. RE: Writes not working - admin - 05-25-2016 The Huey chip is bad! It should run at the same termpatue as Duey (which is room temperture). That is caused by a short on the floppy bus. That could be a bad cable, cable plugged in backwards either to the SCP itself or on the drive side, or bad floppy drive. Not a problem though, I am happy to replace it. Just return it for a new one. RE: Writes not working - bani - 05-25-2016 can't have been plugged in backwards cable. all the cables are keyed and all the drive connectors are keyed. checked cables with multimeter. cables are good. the only thing left is a bad drive. so i need to find out which drive damaged the scp. what lines would have to be shorted to cause damage? RE: Writes not working - admin - 05-25-2016 Any lines that are outputs. They can't be shorted to ground. So things like step, dir, WRData, WREn, etc. Many floppy drive cables are not keyed and can be plugged in either direction. RE: Writes not working - bani - 05-25-2016 well whatever happened to huey wasn't a backwards cable or bad cable or bad drive. they all check out. maybe ESD. i just mail it back to the kiowa blvd address? RE: Writes not working - admin - 05-26-2016 Yes, that's the correct address. RE: Writes not working - bani - 05-31-2016 sent it back, you should receive it soon. RE: Writes not working - admin - 06-01-2016 Already received it and shipped you a new one. You should have it by tomorrow. RE: Writes not working - bani - 06-03-2016 replacement works! |