+- CBMSTUFF FORUM (https://www.cbmstuff.com/forum)
+-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1)
+--- Forum: SuperCard Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=3)
+---- Forum: Other disks (https://www.cbmstuff.com/forum/forumdisplay.php?fid=14)
+---- Thread: Trouble with Kaypro disks (/showthread.php?tid=1237)
Trouble with Kaypro disks - Wayback - 12-13-2025
Hey.
Been using the SCP for years on my Commodore, but recently wanted to start playing around with my Kaypro.
Starting off simple, I wanted to try backing up my Kaypro 2X boot disk to an SCP image, then write it out to a blank. Kind of a proof of concept for me to verify that this thing works for Kaypro disks.
Unfortunately I haven't had any success. Perhaps the SCP isn't compatible with Kaypro disks.... I dunno.
This is why I'm here. If it doesn't support it, then so be it... but if it should, then could you please provide me with the appropriate settings I should use to backup/restore the disk?
Thanks for your time.
Wayback
RE: Trouble with Kaypro disks - admin - 12-14-2025
Flux is flux, it does not matter what upper level format the disk is using.
What disk drive are you using? You should be able to use a simple INDEX mode for imaging and copying. You can always make an image file (using SPLICE mode with 3 revolutions) and send me the image to: data @ cbmstuff.com
I can look at the image file and tell you if there is a problem with the drive, power supply, density, etc.