+- CBMSTUFF FORUM (https://www.cbmstuff.com/forum)
+-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1)
+--- Forum: WiModem232 / WiModem232 Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=79)
+--- Thread: WiModem232 OLED LED stopped working (/showthread.php?tid=1230)
WiModem232 OLED LED stopped working - bbsing - 11-25-2025
Today I was using my WiModem232 and after a at&w the LED went out.
I modified a few things prior to the at&w.
at*busy=in a call write now call back later
ats0=9
at&w
that caused the LED to go out.
I've tried to set the LED via at*led5, at*led0, at*led1, nothing is bring it back.
I did reboot and complete power cycle nothing helped it.
I use that LED to see who is trying to login to my system.
I don't see anyone else with this issue.
firmware: v6.50-01/20/25
RE: WiModem232 OLED LED stopped working - bbsing - 11-25-2025
(11-25-2025, 05:31 PM)bbsing Wrote: Today I was using my WiModem232 and after a at&w the LED went out.
I modified a few things prior to the at&w.
at*busy=in a call write now call back later
ats0=9
at&w
that caused the LED to go out.
I've tried to set the LED via at*led5, at*led0, at*led1, nothing is bring it back.
I did reboot and complete power cycle nothing helped it.
I use that LED to see who is trying to login to my system.
I don't see anyone else with this issue.
firmware: v6.50-01/20/25
After I powered off the WiModem232 for several minutes, and plugged it back in, the LED came back on.
RE: WiModem232 OLED LED stopped working - admin - 11-27-2025
Maybe you have a problem with the power source plugged into the WiModem232?