Couple Questions RE: PET - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: WiModem (https://www.cbmstuff.com/forum/forumdisplay.php?fid=75) +---- Forum: Installation (https://www.cbmstuff.com/forum/forumdisplay.php?fid=76) +---- Thread: Couple Questions RE: PET (/showthread.php?tid=1005) |
Couple Questions RE: PET - Blatboy - 07-08-2023 Hi! I’m going to pick up a WiModem to use w/my PET 4016. (Upgraded 32K) I realize it’ll need to get power from somewhere. As of now, I have a PetSD hooked up that is using the cassette port for power. Question 1: Looking at the images, I didn’t see a USB (mini/micro/otherwise) port to get the power, how does that work? Are there headers? (Apologies if I just missed it) Question 2: Is it possible for multiple devices to pull power from the Cassette port? Thanks! RE: Couple Questions RE: PET - admin - 07-09-2023 If you want a version for a PET make sure you note that in your comments. I actually need to make separate product for this because the board requires jumper settings and a wire soldered to it (where you connect it to a +5V source). You can use multiple devices getting power from the cassette port. |