+- CBMSTUFF FORUM (https://www.cbmstuff.com/forum)
+-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1)
+--- Forum: SuperCard Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=3)
+---- Forum: Installation and setup (https://www.cbmstuff.com/forum/forumdisplay.php?fid=5)
+---- Thread: Help with SCP and Atari 400/800 disks (/showthread.php?tid=746)
Pages:
1
2
RE: Help with SCP and Atari 400/800 disks - Larry44 - 08-31-2020
Although I can't write out a disk with the nice SCP Windows software, I was able to get them to write out correctly using a8rawconv. It was quite a "rain dance" trying to get a virtual com port to open for a8rawconv, but I finally succeeded by attaching my FTDI usb serial port interface to force Windows to attach a VCP. The disk was written out correctly, and all sectors are valid.
That said, I hope that you do find an issue and can fix it so that we can use your Windows software.
RE: Help with SCP and Atari 400/800 disks - admin - 08-31-2020
I am sure that the issue is that it is double-stepping. There was very little testing done with the Atari 400/800 disks because most people do use a8rawconv to control the SCP board for reading/writing those disk types. I was busy with the Commodore Retro eXpo over the weekend, but I will look at this ASAP.