+- CBMSTUFF FORUM (https://www.cbmstuff.com/forum)
+-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1)
+--- Forum: SuperCard Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=3)
+---- Forum: Installation and setup (https://www.cbmstuff.com/forum/forumdisplay.php?fid=5)
+---- Thread: The drive LED doesn't go off (/showthread.php?tid=409)
Pages:
1
2
RE: The drive LED doesn't go off - admin - 12-19-2017
I got your SuperCard Pro board back and it works perfectly!
I am guessing that your cable, drive, or power supply has to be an issue. What jumpers do you have on the floppy drive?
RE: The drive LED doesn't go off - jhons7 - 12-19-2017
Why!? I don't know why It's didn't work on my FDD.
Here is jumper settings for MPF920-5 and MPF420-4.
I'm also using MPF920-5 for KryoFlux. It works perfectly.
RE: The drive LED doesn't go off - admin - 12-19-2017
I am not sure how those jumpers are set (can't tell from the picture). You will want to look at DS0, DS1, and DS2 jumper positions. I just plugged your SuperCard Pro board into my NEC drive and it worked. I will have to find one of my MPF920 drive and try it, but I expect it to work just fine. Your boards passes all of the diagnostics and made a few copies that worked fine.