05-04-2022, 11:15 AM
These few questions may sound obvious, and I apologise if they but I'd appreciate answers.
* The RF modulator. Is it needed, should I fit a de-soldered commodore item removed from a 64 and does it output ~ channel 35 like original commodore 64s?
* The R-L header. Is it intended to connect to a stereo audio jack, should I fit a plug and cable relieving a hole in the RF Modulator shield to get from the header to the case?
* The VIC-II shield. Should I fit it?
I'm waiting on a couple of zenner diodes to drop through my letterbox and I will have finished. I found the ICS64 documentation, build guide and BOMs invaluable and a pleasure to use. They were half the fun of the project.
* The RF modulator. Is it needed, should I fit a de-soldered commodore item removed from a 64 and does it output ~ channel 35 like original commodore 64s?
* The R-L header. Is it intended to connect to a stereo audio jack, should I fit a plug and cable relieving a hole in the RF Modulator shield to get from the header to the case?
* The VIC-II shield. Should I fit it?
I'm waiting on a couple of zenner diodes to drop through my letterbox and I will have finished. I found the ICS64 documentation, build guide and BOMs invaluable and a pleasure to use. They were half the fun of the project.