Telnet translation

[Montezuma]

Hi,
I wondered which "TELNET Options" are supported by the WiModem232 firmware when TELNET translation is enabled (AT*T1).

For example in PUTTY telnet client source code:
https://git.tartarus.org/?p=simon/putty....3f54b432af

I found the following options:

Code:

NAWS, TSPEED, TTYPE, OENV, NENV, ECHO, SGA, BIN

Regards
M

[admin]

None of the Telnet commands are supported. Any time a Telnet command or request is sent to the WiModem(232) while using telnet translation mode (AT*T1), the WON'T/DON'T response is returned.