Hi there. I recently picked up the WiModem232 with OLED v2.
I have an Apple IIGS ROM1
the WiModem
This other cable that I use to connect from my modem port to a USB cable typically for ADTPro - and that works just fine.
And I had to pick up this adaptor to change the genders to connect to the WiModem.
I have attached some pictures. I'm wondering, is my hardware even correct. I see some talk of a NULL modem cable. I honestly forgot what cable I have but it was just a cheap cable I bought off ebay, but it DOES work when i connect for ADP Pro, unless the wiring inside is different and it's ill-suited for what I'm doing here.
I'm using ProTerm 3.1. When I load it up, it wants me to select a modem driver and Port. Well, I choose the Apple Modem 300 (as I understand its only working with 300 baud). I then select the Apple IIGS built in modem port and none of this smart serial business.
I input the init code, and I just blow past the printer settings as I don't know why it needs to talk to the printer. What is that for?
Anyways, I try to save, use the init settings from here (https://www.cbmstuff.com/forum/showthread.php?tid=477)
ProTerm says it's unable to init.
I don't know if's the hardware I have or just picking the wrong things via software or both.
I have an Apple IIGS ROM1
the WiModem
This other cable that I use to connect from my modem port to a USB cable typically for ADTPro - and that works just fine.
And I had to pick up this adaptor to change the genders to connect to the WiModem.
I have attached some pictures. I'm wondering, is my hardware even correct. I see some talk of a NULL modem cable. I honestly forgot what cable I have but it was just a cheap cable I bought off ebay, but it DOES work when i connect for ADP Pro, unless the wiring inside is different and it's ill-suited for what I'm doing here.
I'm using ProTerm 3.1. When I load it up, it wants me to select a modem driver and Port. Well, I choose the Apple Modem 300 (as I understand its only working with 300 baud). I then select the Apple IIGS built in modem port and none of this smart serial business.
I input the init code, and I just blow past the printer settings as I don't know why it needs to talk to the printer. What is that for?
Anyways, I try to save, use the init settings from here (https://www.cbmstuff.com/forum/showthread.php?tid=477)
ProTerm says it's unable to init.
I don't know if's the hardware I have or just picking the wrong things via software or both.