AT*T1 and power-cycle - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: WiModem (https://www.cbmstuff.com/forum/forumdisplay.php?fid=75) +---- Forum: Firmware (https://www.cbmstuff.com/forum/forumdisplay.php?fid=78) +---- Thread: AT*T1 and power-cycle (/showthread.php?tid=403) |
AT*T1 and power-cycle - Zeropage - 10-14-2017 Hi Jim Is the AT*T1 setting supposed to survive a power cycle after I AT&W ? It doesn't seem to, I find I have to re-issue the command every time. RE: AT*T1 and power-cycle - admin - 10-14-2017 Good question! I might have forgotten to add that to the AT&W command. I will look into it. RE: AT*T1 and power-cycle - admin - 10-14-2017 Yep, you're right - the *T setting was not being saved. A new version of firmware is now available. Thanks for pointing this out! RE: AT*T1 and power-cycle - Zeropage - 10-15-2017 Cool, updated this morning, looks good. Thanks |